 +86-0571-63168668

 gina.yu@hzzjjx.com

 +86-13777476746

 En 

About ZJ

Products

Distilling Equipment

Brewing Equipment

Business Service

100% Quality

Resources

Contact



What are you looking for? 

Hangzhou Zhengjiu Machinery Manufacturing Co.,LTD.









 

500L Vodka Still

A Dual Pot Still is used in some distilleries, made up of a Wash Still and a Spirit Still. In this set-up, a Wash Still performs a stripping run where the ethanol present in the wash after fermentation is distilled to collect what’s known as low wines. These are then transferred to the Spirit Still for a second distillation.

Usually a Spirit Still is only about a third of the overall volume of the Wash Still, but this can vary depending on the process being followed.

A Dual Pot Still can be built in copper or a combination of copper and stainless steel, and built with various neck designs and lyne arm slopes. If a column is required, it can be built as a single column or split to shorten.

Capacity: 500L , customizable
Material: Red copper TP2, SUS304
Dimensions: Pot Diameter:1200mm, Height: 4300mm

Specification Detail Features

Specification

Specification of Vodka Still

Item No.	ZJVS-500L
Product name	500L vodka & gin still
Capacity	500L , customizable
Material	Red copper TP2, SUS304
Dimensions	Pot Diameter:1200mm, Height: 4300mm
Thickness	4mm
Appication	To make vodka & gin

Detail

Detail of Vodka Still

01

Vodka may be distilled from any starch or sugar rich base. Most vodka today is produced from grains such as sorghum, corn, rye or wheat.
Vodka must undergo many distillations in order to raise the proof of the spirit to the required 190 proof. This is normally done using a rectification column attached to the still with 20-40 plates. Each plate acts as a separate distillation thereby increasing the proof at each step. Plates are covered with multiple bubble caps which help disperse the vapors through the liquid and increases the liquid-vapor contact resulting in higher plate efficiency.

Features

Features of Vodka Still

Typical Distillation Time:

1-hour heat up

2–4 hours for stripping run

3–5 hours for distillation

Detailed Configuration:

500L Copper Pot: Interior pot with water bath heating jacket, PU insulation, and SS304 outer wall

Whiskey Helmet

Two 12-plate copper integrated columns with bubble caps and SS304 dephlegmators

Copper Gin Basket

SS304 Condenser

Stainless Steel and Glass Parrot Outlet

Stainless Steel Frame

Electrical Controller

CIP Cleaning System

Options:

Copper/SS316/SS304 boiler

Copper/SS316/SS304 column

Copper/SS316/SS304 condenser

System Overview:

Ideal for vodka, whiskey, and gin production

Single distillation yields 90%-95% ABV alcohol

Affordable and user-friendly

Simple maintenance with CIP system

Available in 304 stainless steel with fish scale or mirror finish

Contact

Keep in touch!

Build your perfect brewery or distillery with Zhengjiu Machinery. Our techs excel at full-scale design & implementation on turnkey project, ready to offer comprehensive solutions.