Three Methods of Cleaning Ferment Tank

Fixed cleaning ball: 

The traditional fixed cleaning ball is the most commonly used cleaning equipment. Fixed cleaning balls come in different types, sizes and cleaning capabilities. The fixed cleaning ball can spray the cleaning solution onto the tank wall for a fixed and simple cleaning. Fixed cleaning balls are best for cleaning tank walls. Water is sprayed from a single orifice with holes and then to the same spot on the tank wall. Due to the size limitations of the nozzle, the force sprayed on the tank wall at each impact point is very limited, and the amount of water at the non-impact point is effectively zero. Therefore, in order to achieve the desired cleaning effect, the company must use a large number of high-concentration chemical cleaners or high-temperature cleaning fluids for long-term cleaning.

Rotating cleaning ball: 

In actual cleaning, the method and effect of rotating cleaning ball are better than the traditional fixed cleaning ball. The nozzle of the rotating cleaning ball is sprayed on the wall of the tank in an irregular manner. The combination of the cleaning method and mechanical shock reduces the consumption of water and chemicals compared to the stationary cleaning ball, and the residue can be removed in a short time.

Double cycle cleaning device: 

Double cycle cleaning can effectively clean the ferment tank. Spray cleaning methods include middle and upper spray, middle and lower spray, full spray, 360-degree spray cleaning, high cleaning efficiency, low water and energy consumption and the amount of chemical agents; Sanitary structure, self-lubricating with cleaning liquid, can be cleaned at any Angle of the tank.

The ferment tank needs to be cleaned after a period of use. Cleaning the ferment tank ensures product quality and extends the service life of the ferment tank equipment.